SWF/E-UK1502DM Highlights

Featuring the most advanced technology in Embroidery Production, the SWF DM Series was designed from the ground up for one ultimate purpose—High Speed Production. The new Dream Machines embroider at speeds up to 1500 stitches per minute allowing you to produce up to 150% of your current volume! The DM series also offers machine configurations ranging from 2-8 heads. Large or small, embroidery shops of any size can benefit from the increased production capabilities of the DM Series

Increased production enables you to increase profits by offering faster turn around at the lowest and most competitive pricing. Whether competing in local or international embroidery markets, the DM series offers the Ultimate Competitive Edge!

• 1500 stitches per minute (fastest in the industry)
• Sewing field: 500 x 450 mm (19.7" x 17.7")
• Automatic oiling system
• USB Port for design transfer
• 10" high resolution LCD Monitor
• Automatic thread trimmer
• Rotary thread break detection
• Built-in power monitoring
• 2 million stitch memory capacity
• 220v single phase power
• Workspace Light
• Tangle Free Thread Tubing
• Convenient install & Uninstall of presser foot

FEATURES 1500 stitches per minute (fastest in the industry) Sewing field: 500 x 450 mm (19.7" x 17.7") Automatic oiling system USB Port for design transfer 10" high resolution LCD Monitor Automatic thread trimmer Rotary thread break detection Built-in power monitoring 2 million stitch memory capacity 220v single phase power Workspace Light Tangle Free Thread Tubing Convenient install & Uninstall of presser foot

INCLUDED ACCESSORIES (4) 12cm Shirt Front Hoops (4.7") (4) 15cm Shirt Front Hoops (5.9") (4) 18cm Shirt Front Hoops (7.1") (4) 9 cm shirt front hoops (3.5") (4) Cap Frames (14.2" x 2.9") Border Frame Bobbin Winder Cap Driver sash Cap Gauge (hooping device) Tubular sash arms Backup of software on disk Tool kit Machine grease Machine oil and oiling bottle Foot bolts and pads Operation manual Cap frame manual

SWF/E-UK1502DM Gallery

SWF/E-UK1502DM Video Gallery

Dream Machine Video

Dream Machine Speed Video

SWF/E-UK1502DM Dimensions

	2-Head Machine	4-Head Machine	6-Head Machine
Dimensions (W, D, H) Without Table	213.4 x 86.3 x 180.3 cm (7′ x 2.9′ x 5.9′)	294 x 86.3 x 180.3 cm (9.65′ x 2.9′ x 5.9′)	398.6 x 86.3 x 180.3 cm (13.1′ x 2.9′ x 5.9′)

LCD CONTROL PANEL

10 inch high resolution LCD uses on-screen prompts to guide you through every step of moving the frame or needle bar, loading the design, choosing the hoop size, tracing the design, and more using the key-type user interface.

Features

• User Friendly User Interface View design and all settings on a brilliant 10 inch color LCD screen. Easy to use dialog boxes walk you through every step.
• High Resolution Color Monitor (640x480): View sew-out progress on-screen, with a marker showing the exact point in the design that is currently being sewn. Also view color palettes on screen.
• Easy Operation Control panel rotates to be easily viewed from different angles. Touch-screen puts design and sew-out information at your fingertips.
• Memory Capacity: Store a maximum of 100 designs or 2 million stitches.
• Rotate or Mirror Design: All designs can be rotated from 0° to 359° in increments of 1°. Designs are also easily mirrored.
• Scale Up/Down: Scale designs up by 200% or down by 50% along the X or Y axis, in increments of 1%.
• Built-in 3.5" Floppy Disk Drive: Save up to 480,000 stitches or 233 designs per high density floppy 3.5" floppy disk. The drive also reads double density disks. Read and save designs in SWF format.
• Automatic Offset: The frame automatically returns to the offset point when the embroidery is finished to make it easier for you to switch frames.
• Manual Offset: Manually move the frame to the pre-selected point to do appliqués or change the frames during embroidery work. Frame can then easily be moved back to its original place.
• Return to Start: Easily return to the start point of the design at any time.
• Tracing: For accurate position of embroidery, the machine traces the outline of design before starting main operation.
• Automatic Return to Stop Point After Power Failure: When unexpected power failure occurs, the frame moves back to the exact point where stitching stopped.
• Floating: The frame can process both forward and backward without stitching by units of 1, 100, 1000 and 10000 stitches or by color code.

FEATURES

Automatic Oiling System

The automatic oiling system allows for low maintenance and more production time.

Patented Arm Driving Unit

Patented arm driving unit, with a Presser foot driving mechanism, that is separate from the needle bar movement.

Convenient install & Uninstall of presser foot

Enables an extra variety of embroidery work to be preformed on machine

Expanded Memory Size

Store up to 100 designs with a basic memory capacity of 2 million stitches.

Mirror Image Conversion and Design Direction

Designs can be rotated from 0° to 359° in 1° increments. Designs can also be flipped horizontally or vertically.

Reduce and Enlarge Designs

Selected designs can be enlarged or reduced from 50% to 200% by 1% increments and in any direction.

General Repetition Work

One design can be repeated up to 99 times along X, Y and both directions.

Special Repetition Work

Several designs can be repeated up to 69 times at same time.

Thread Break Sensor

The machine detects when the upper thread breaks or the lower thread is out of the needle and automatically stops the machine.

Automatic Offset

The frame automatically returns to the offset point when the embroidery is finished to make it easier for you to switch the frames. You can select AUTOMATIC OFFSET at PARAMETER SELECT MODE to move the frame automatically to the desired point, making it easier to do appliques and emblems.

Manual Offset

Manual Offset allows the user to manually move the frame to a pre-selected point. This feature makes it easy to do applique or to change frames while embroidering.

Origin Return

Frame can returned to origin point of design during embroidery work.

Electronic Adjustable Presser Foot Height

Presser Foot height is adjustable according to embroidery material with just a touch of a button.

Internal X-Y Direct Driven System

Ultra Precise movement & control of X-Y pantograph. Superior Embroidery Quality

Ultra Heavy Duty Pantograph

Ultra Precise movement & control of X-Y pantograph. Superior Embroidery Quality

Non-Stitch Function

The frame and the needle bar can move back and forth by the units of 1, 100, 1000, and 10,000 stitches and by color without stitching.

Frame Reversal

When the thread breaks or runs out of track, you may move the needle bar back to the starting point of the design in the units of one to ten stitches.

Automatic Return

Frame will move back to its last position after power interruption. This function helps minimize stitch errors while embroidering.

Editing

Edit jump stitches, trims, and end points from the control panel.

Individual Head Operation

In the event of a thread break or other error, only the affected head will stop running. This keeps your machine running and helps to eliminate costly downtime.

Supports Many Design Formats

All E-Series embroidery machines support multiple design formats to help maximize your production capabilities.

3.53 Floppy Drive (Embedded)

The control panel includes an internal 3.53 floppy drive to help you transport designs to the embroidery machine quickly. 3.53 drive is compatible with both 2DD and 2HD disks.

USB Port

The USB port allows you to easily move designs to and from your embroidery machine using USB external storage devices.

Additional Information

Power: 220 VAC

Embroidery Area: 500 x 450mm (19.7″ x 17.7″)

Maximum Speed: 1,500 Stitches per Minute

Memory: 100 Designs or up to 2,000,000 Stitches

SWF/E-UK1502DM Options

SWF East offers several devices and attachments for existing embroidery machines, among them the BORING and SEQUIN options.

For further information and additional specifications, please contact an SWF East Account Manager. Toll Free 877-793-3278.

BORING DEVICE

Boring is open-work incorporated into embroidered designs; a sharp-pointed instrument punctures, or bores, the fabric, and stitches are made around the opening to enclose the raw edges. When installing the boring device to the needle bar, make sure the tip of the blade is not touching your finger.

CORDING DEVICE

Cording: The Application which wraps colorful thread around a core thread which is simultaneously attached to a base material so the stitches cannot be seen. With our Cording device, you can achieve a thread thickness of 1.3mm to 2.5 mm.

SEQUIN DEVICE - SQ30

Sequins can be attached to any underlay used for normal embroidery For use with high-strength polyester (monofilament) thread Works with all commercial sequins

SEQUIN DEVICE - SQ30D

Sequins can be attached to any underlay used for normal embroidery For use with high-strength polyester (monofilament) thread Works with all commercial sequins